Husqvarna FC 450 2018 Repair Manual page 64

9 SHOCK ABSORBER, LINK FORK
62
-
Position link fork and mount fork pivot.
Info
Pay attention to flat area f).
8 .
Mount and tighten nut
Guideline
I
I Nut, fork pivot
-
Mount the chain.
-
Connect the chain with connecting link@).
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
-
Position the foot brake cylinder.
C,
✓ Push rod engages in the foot brake cylinder.
Info
Ensure that the dust boot is correctly seated.
-
Mount and tighten screws
Guideline
Remaining screws,
chassis
-
Position the angle lever and linkage lever.
-
Mount and tighten fitting (D.
Guideline
Nut, linkage lever to
angle lever
• Info
I
Pay attention to flat area G).
-
Mount and tighten screw@.
Guideline
M10
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
I
M16x1.5 100 Nm (73.8 lbf ft)
0.
10 Nm (7.4 lbf ft)
M6
M 14x1 .5 80 Nm (59 lbf ft)
60 Nm (44.3 lbf ft)
®
Loctite
I
TM
2701