Husqvarna FC 450 2018 Repair Manual page 167

-
Position the link fork.
-
Mount the fork pivot.
8 .
-
Mount and tighten nut
Guideline
I
Nut, fork pivot I M16x1 .5
-
Position the linkage lever.
-
Mount and tighten fitting
Guideline
Nut, linkage lever to
angle lever
• Info
I
Raise the wheel slightly to be able to mount the screw
more easily.
8 .
-
Mount spring
-
Position the positive cable on the starter motor.
-
Mount and tighten the nut.
Guideline
Nut, cable on starter
motor
0.
-
Position protection cap
-
Position the throttle valve body.
-
Tighten hose clip (D.
I 100 Nm (73.8 lbf ft) I
@).
M14x1 .5 80 Nm (59 lbf ft)
M6 4 Nm (3 lbf ft)
ENGINE 17
165