Checking The Rocker Arm Shafts; Installing The Valves - Husqvarna FC 450 2018 Repair Manual

17.4.33

Checking the rocker arm shafts

• . ---•
--- ------
17.4.34

Installing the valves

Using a straightedge and the special tool, check the sealing
area of the cylinder for distortion.
I
Feeler gauge (59029041100)
Cylinder/cylinder head -
sealing area distortion
If the measured value does not meet specifications:
-
Change the cylinder head.
D04976-10
Check sealing seat
Valve
Intake sealing seat width
Valve
Exhaust sealing seat
width
If the measured value does not meet specifications:
Rework the valve seat.
302808-10
Blow compressed air through all oil channels and check that
they are clear.
Check the rocker arm shafts for damage and wear.
If there is damage or wear:
=
-
Change the rocker arm shafts.
D04973-10
Position valve spring seats
8.
seals
Mount the valves according to their normal built-in position.
Mount the springs and spring retainers (D.
D04974-10
(8 p. 311)
:;; 0.10 mm (:;; 0.0039 in)
6) of the valves.
2.00 mm (0.0787 in)
2.00 mm (0.0787 in)
1
Mount the new valve stem
Q.
ENGINE 17
...
...
209