Removing The Clutch Basket; Removing The Torque Limiter; With The Washer - Husqvarna FC 450 2018 Repair Manual

17 ENGINE
17.3.21
17.3.22
182

Removing the clutch basket

Removing the torque limiter

-
Lock the clutch basket and primary gear wheel using special
O.
tool
I Gear segment (80029004000)
@.
Remove nut
Info
LH thread!
-
Bend up the lock washer.
-
Hold the inner clutch hub with the special tool.
I Holding wrench (51129003000)
8
Remove nut with the lock washer.
-
Take off inner clutch hub
Info
The washer usually sticks to the inner clutch hub.
-
Take off clutch basket (D.
-
Take off both needle bearings@ and collar bushing@).
O
-
Remove screw

with the washer.

-
Take off the torque limiter.
(IUI p. 318)
(IUI p. 309)
0.
C,
and washer