Installing The Water Pump Cover - Husqvarna FS 450 2018 Repair Manual

17 ENGINE
17.5.18
236

Installing the water pump cover

-
Mount the clutch cover.
C,
-
Mount screws but do not tighten yet.
Guideline
I I
Screw, clutch cover
0
Mount screw but do not tighten yet.
Guideline
I I
Screw, clutch cover
(D
-
Mount screw but do not tighten yet.
Guideline
I I
Screw, clutch cover
-
Mount screw @ and tighten all screws in a crisscross pat­
tern.
Guideline
I I
Screw, clutch cover
-
Remove the special tool.
I Locking screw (78129032000)
-
Put the water pump cover seal in place.
-
Mount the water pump cover.
O
-
Mount screw with the sealing washer but do not tighten
yet.
Guideline
Screw, water pump
cover
-
Mount screw f!} but do not tighten yet.
Guideline
Screw, water M6x25
pump cover
@)
-
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
Screw, water pump
cover
I
M6x25 10 Nm (7.4 lbf ft)
M6x45 110 Nm (7.4 lbf ft)
M6x50 110 Nm (7.4 lbf ft)
M6x30 110 Nm (7.4 lbf ft)
p. 313)
(8
M6x25 10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite
10 Nm (7.4 lbf ft)
M6x55
..
® 243
™
..