Husqvarna FC 450 2018 Repair Manual page 168

17 ENGINE
166
Position the shift lever.
Mount and tighten screw @ with washers.
Guideline
Screw, shift M6
lever
-
Slide on the engine sprocket with the collar facing the engine.
Mount screw G) with the washer but do not tighten yet.
Guideline
Screw, engine M10
sprocket
Mount the chain.
-
Connect the chain with connecting link@).
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
-
Actuate the foot brake lever.
-
Tighten screw G).
Guideline
Screw, engine M10
sprocket
Info
The help of an assistant is useful in this step.
Position clutch slave cylinder with the new gasket.
Mount and tighten screws
Guideline
Screw, clutch slave
cylinder
14 Nm (10.3 lbf ft)
Loctite
60 Nm (44.3 lbf ft)
®
Loctite
60 Nm (44.3 lbf ft)
®
Loctite
G.i).
M6 10 Nm (7.4 lbf ft)
®
243
™
TM
2701
TM
2701