Checking Throttle Cable Play; Adjusting Throttle Cable Play - Husqvarna FC 450 2018 Repair Manual

7.6
Checking throttle cable �la�
Adjustin throttle cable play
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
HANDLEBAR,CONTROLS 7
-
Check the throttle grip for smooth operation.
-
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
G.
throttle cable
I
Throttle cable play
If the throttle cable play does not meet specifications:
-
Adjust throttle cable play.
-
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but­
ton returns to its original position.
If the cold start button does not return to its original posi­
tion:
-
Adjust throttle cable play.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
-
Start the engine and let it run at idle speed. Move the handle­
bar to and fro over the entire steering range.
I
The idle speed must not change.
If the idle speed changes:
-
Adjust throttle cable play.
Preparatory work
-
Remove the air filter box cover.
-
Remove the seat. (8 p. 1 00)
-
Remove the right side cover.
-
Remove the fuel tank. (8
-
Check throttle cable routing.
I
3 ... 5 mm (0.12 ... 0.2 in)
(0 p. 49)
(0 p. 49)
Exhaust gases are toxic and
(8 p. 49)
(0 p. 96)
(8 p. 100)
p. 102)
(8 p. 48)
...
49