Husqvarna FC 450 2018 Repair Manual page 114

12 FUEL TANK, SEAT, TRIM
112
-
Position the fuel pump.
8
-
Mount nut with gasket, but do not tighten yet.
Guideline
Nut, fuel pump fas­
tener
-
Mount and tighten screws
Guideline
I
I Screw, fuel pump
✓ The connector points downwards.
(i)
-
Grease O-rings lightly.
I Multi-purpose grease (00062010051)
• Info
I
Make sure that no grease gets into the fuel connec­
tion.
fD
-
Mount fuel connection
yet.
0
✓ The cut-out is aligned to the nut
8.
-
Tighten nut
Guideline
Nut, fuel pump fas­
tener
fD.
-
Tighten fuel connection
Guideline
Fuel connection on
fuel tank
-
Attach side covers in area
-
Mount and tighten screws
Finishing work
-
Install the fuel tank. (8 p. 103)
-
Install the right side cover.
-
Mount the seat. (8 p. 101)
M12x1.75 15 Nm (11.1 lbf ft)
C,.
1
2.3 Nm (1.7 lbf ft)
EJOT
(8 p. 305)
with gaskets but do not tighten
8.
M12x1.75 15 Nm (11 .1 lbf ft)
M8x1 .25 10 Nm (7.4 lbf ft)
6)
and position.
O.
(8 p. 100)