Husqvarna FC 450 2018 Repair Manual page 24

6 FORK, TRIPLE CLAMP
22
-
Remove dust boot
-
Remove fork protector ring G).
Info
The fork protector ring does not necessarily need
to be removed for repair work.
-
Remove lock ring
• Info
I
The lock ring has a beveled end where a screw­
driver can be applied.
-
Warm up the outside fork tube in area
sliding bushing.
1 Guideline
so c
(122 °F)
0
-
Pull the outside fork tube off the inside fork tube with a
jerk.
Info
B03528-11
Lower sliding bushing C) must be drawn from its
bearing seat.
-
Remove upper sliding bushing
Info
Without using a tool, pull the stack slightly apart
by hand.
-
Take off lower sliding bushing C).
-
Take off support ring
-
Take off seal ring
-
Take off lock ring
-
Take off dust boot
-
Unclamp the fork leg.
C,.
0-
(i)
of the lower
@.
fD.
@).
0.
C,.