Husqvarna FC 450 2018 Repair Manual page 134

14 WHEELS
132
0.
Remove engine sprocket
Remove fittings 0). Take off the rear sprocket.
Position the new rear sprocket. Mount and tighten the fit­
tings.
Guideline
Nut, rear M8
sprocket screw
0
Slide new engine sprocket
Mount the new chain.
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Install the rear wheel. (!!:!I p. 125)
Have an assistant operate the rear brake.
CD
Mount and tighten screw
Guideline
Screw, engine M10
sprocket
35 Nm (25.8 lbf ft)
®
Loctite 2701
onto the countershaft.
C,.
with the washer.
60 Nm (44.3 lbf ft)
®
Loctite 2701
TM
TM