CLEANING/PROTECTIVE TREATMENT
Push back the protection caps of the handlebar controls to
allow any water that has penetrated to evaporate.
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
Clean the chain.
(0
Treat bare metal (except for brake discs and the exhaust sys
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
(0
p. 305)
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces
p. 130)
(0
p. 305)
26
41
289