Installing The Locking Lever; Installing The Shift Drum Locating Unit; Installing The Shift Shaft; Installing The Force Pump - Husqvarna FC 450 2018 Repair Manual

17.5.9

Installing the locking lever

17 .5.10

Installing the shift drum locating unit

17 .5.11

Installing the shift shaft

17.5.12

Installing the force pump

O
-
Mount locking lever with the washer, sleeve and spring.
Mount and tighten screw
Guideline
MS
Screw, locking
lever
-
Push away locking lever
and position the shift drum locating unit
• Info
I
The flat areas of the shift drum locating unit are not
symmetric.
-
Relieve tension from the locking lever.
-
Mount and tighten screw (i) .
Guideline
Screw, shift M6
drum locating
O
-
Slide shift shaft with the washer into the bearing seat.
8
Push sliding plate away from the shift drum locating unit
and insert the shift shaft all the way.
-
Let the sliding plate engage in the shift drum locating
unit (i) .
-
Shift through the transmission.
-
Oil the oil pump shaft, internal rotor, and external rotor before
assembly.
O.
Mount oil pump shaft
8.
-
Mount pin
-
Mount the internal rotor with the recess facing inward.
-
Mount external rotor (i) with the bevel facing inward.
8.
6 Nm (4.4 lbf ft)
Loctite
O
from the shift drum locating unit
8.
10 Nm (7.4 lbf ft)
Loctite
ENGINE 17
®
243
™
...
® 243
™
...
...
225