Assembling The Piston Rod - Husqvarna FC 450 2018 Repair Manual

9 SHOCK ABSORBER, LINK FORK
9.22
74
e
/
201409-10
804413-10
804414-11

Assembling the piston rod

802056-11
8.
-
Mount washer
4D
-
Position washer on seal ring
C,
-
Grease seal ring and mount with the washer facing down­
ward.
I Lubricant (T14034) (g p. 304)
0
-
Mount centering disk
- @.
Mount rebound rubber
-
Grease the 0-ring groove.
I Lubricant (T158) (0 p. 304)
@).
-
Mount 0-ring
Preparatory work
-
Assemble the seal ring retainer.
Main work
-
Clamp the piston rod with the fork in a bench vise.
Guideline
I Use soft jaws.
O
-
Mount rubber buffer
-
Position special tool on the piston rod.
I Mounting sleeve (T1 515)
-
Grease the dust boot and slide the seal ring retainer
the piston rod.
I Lubricant (T625) (0 p. 304)
-
Remove the special tool.
C,.
with spring C).
(g p. 73)
8.
and protection cap
(0 p. 325)
8
onto