Table of Contents
Advertisement
-
Connect negative cable
Guideline
Screw, battery termi-
nal
•
Info
I
0
Contact disk
and the cable lug
-
Remove filler plug � with the O-ring, and fill up with engine
oil.
Engine oil
Mount and tighten oil filler plug � with the O-ring.
Finishing work
-
Install the main silencer.
-
Install the fuel tank.
(0
p. 103)
-
Install the right side cover.
-
Mount the seat.
(0
p. 101)
-
Install the air filter box cover.
-
Remove the motorcycle from the lift stand.
-
Refill with coolant.
(0
p. 255)
-
Install the engine guard.
-
Perform the initialization run.
-
Go for a short test ride.
-
Read out the fault memory using the Husqvarna Motorcycles
diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
@!).
M5
2.5 Nm (1 .84 lbf ft)
must be mounted under screw €!)
G
with the claws facing down.
1.20 I
Engine oil
(1.27 qt.)
(SAE 1 0W/50)
(0
p. 302)
(0
p. 94)
(0
p. 100)
(0
p. 96)
(0
p. 12)
(0
p. 52)
(0
p. 278)
(0
p. 262)
(0
p. 254)
ENGINE 17
...
171
Advertisement
Chapters
Table of Contents
