Husqvarna FC 450 2018 Repair Manual page 249

-
Check clutch throw-out
If there is damage or wear:
-
Change the clutch push rod.
-
Place the clutch push rod
If there is run-out:
-
Change the clutch push rod.
C,
-
Check spring retainer
If there is damage or wear:
-
Change the spring retainer.
(D
-
Check pretension ring
If there is damage or wear:
-
Change the pretension ring.
0
-
Check spring washer
-
Take off inner clutch hub
-
Take off clutch basket
-
Take off needle bearing� and collar sleeve
CD
for damage and wear.
@)
on a flat surface and check for run-out.
for damage and wear.
for damage and wear.
for damage and wear.
41)
and washer
Info
The washer usually sticks to the inner clutch hub.
e.
Info
The needle bearing and collar sleeve may be in the
clutch basket.
T00332-10
CLUTCH
4D.
48.
247
18