Checking The Link Fork; Checking The Fork Bearing For Play - Husqvarna FC 450 2018 Repair Manual

9.29 Checkin the link fork
Checking the fork bearing for lay
9.30
SHOCK ABSORBER, LINK FORK 9
-
Press the heim joint against the lock ring using the special
tool.
I
Pressing tool (T1207S)
-
Mount second lock ring
-
Position both collar bushings
Finishing work
-
Install the shock absorber.
-
Check the free travel of the foot brake lever.
-
Remove the motorcycle from the lift stand.
-
Check the link fork for damage, cracking, and deformation.
If the link fork exhibits damage, cracking, or deformation:
-
Change the link fork.
K01115-01
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Place a load on the front of the vehicle.
✓ The rear wheel is not in contact with the ground.
(I!!:! p. 321)
8.
O
and press in.
(0 p. 61)
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
(0 p. 12)
(0 p. 152)
..
(0 p. 12)
..
85