Husqvarna FC 450 2018 Repair Manual page 172

17 ENGINE
170
Guideline
Screw, sub­
M8
frame
Repeat the operation on the opposite side.
Mount the vent hose and position hose clamp
Plug in the connector.
Mount protection cap �.
Position and tighten hose clip
Attach frame protector in area
@)
Mount and tighten screws
Guideline
MS
Screw, frame pro­
tector
Mount the cable ties.
30 Nm (22.1 lbf ft)
®
Loctite 2701
TM
@).
9-
G
and position.
with the washers.
3 Nm (2.2 lbf ft)