Husqvarna FC 450 2018 Repair Manual page 82

9 SHOCK ABSORBER, LINK FORK
80
ft
When the pressure gauge reaches the specified value, turn
0
control lever Oil reservoir
Guideline
0 bar
✓ The vacuum gauge drops to the required value.
4 mbar
When the vacuum gauge reaches the required value, turn
0
control lever
Oil reservoir
Guideline
14
mbar
✓ The pressure gauge drops to the required value.
0 bar
When the pressure gauge reaches the specified value, turn
C,
control lever Damper to Pressure.
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the required value.
3 bar
When the pressure gauge reaches the specified value, turn
C,
control lever
Damper to Vacuum.
Guideline
3 bar
✓ The pressure gauge drops to the required value.
0 bar
When the pressure gauge reaches the required value, acti­
vate the switch.
On/Off
Guideline
0 bar
✓ The vacuum pump is switched off.
Slide O-ring G) to the end of the special tool by the specified
O
value (distance minus specified value).
Guideline
5mm
Depth micrometer (T107S)
Slide the floating piston into the reservoir to the shortened
position using the special tool.
to Vacuum.
to Equalize Pressure.
(� p. 320)