Husqvarna FC 450 2018 Repair Manual page 253

-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (59029041100)
Spring washer distortion
If the specified value is not reached:
8
Remove screws
with marking II.
-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (590290411 00)
Spring washer distortion
If the specified value is not reached:
8
-
Remove screws
with marking Ill.
-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (590290411 00)
Spring washer distortion
If the specified value is not reached:
-
Change the clutch facing discs.
-
Position the clutch cover with the gasket.
-
Mount and tighten screws
I Guideline I
Screw, clutch cover
O.
-
Attach spring
(8 p. 311)
0 ... 0.10 mm (0 ...
0.0039 in)
and mount the spring retainer
(8 p. 311)
0 ... 0.10 mm (0 ...
0.0039 in)
and mount the spring retainer
(8 p. 311)
0 ... 0.10 mm (0 ...
0.0039 in)
@}.
M6 10 Nm (7.4 lbf ft)
CLUTCH 18
251