Husqvarna FC 450 2018 Repair Manual page 251

0-
-
Mount clutch basket
✓ Turn clutch basket until the gear teeth mesh with the oil
pump gear wheel.
-
Mount washer
-
Position the new lock washer and mount nut
nut, holding the inner clutch hub with a special tool.
Guideline
I
Nut, inner clutch hub
I
Holding wrench (51129003000)
-
Secure the nut with the lock washer.
-
Mount sleeves Ci).
-
Thoroughly oil the clutch facing discs.
-
Mount intermediate clutch disc
Guideline
Thickness of intermediate
G
clutch disc
-
Alternately place the clutch facing and 7 intermediate discs
into the clutch basket.
Guideline
311602-10
Thickness of middle inter­
mediate clutch discs
-
Place intermediate clutch disc G) into the clutch basket.
Guideline
Thickness of intermediate
clutch disc G)
48.
4D
and inner clutch hub 41).
I
M18x1 .5 I 80 Nm (59 lbf ft)
(� p. 309)
G
with marking S.
1 .0 mm (0.039 in)
1 .4 mm (0.055 in)
1.0 mm (0.039 in)
CLUTCH
48.
Tighten the
249
18