▶ Open the hook-and-loop-tape (1).
▶ Disconnect the power cord from the PSU (2).
▶ Roll the hook-and-loop-tape around the handle on the PSU.
It will take about 60 seconds until the server can be powered on.
4.4
Getting access to the component
4.4.1
Safety notes
CAUTION
▶
Only for non-hot plug components:
● Before removing or attaching covers, turn off the server, all
peripheral devices, and any other connected devices.
● Because there is a risk of electric shock or damage, please
disconnect all power cords from the outlet.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see
RX4770 M5
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
29.
47