Table of Contents
Advertisement
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your WAH7130.
Figure 40 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 34 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Check for Latest
Firmware Now
Note: Do not turn off the WAH7130 while firmware upload is in progress!
Wait two minutes before logging into the WAH7130 again. The WAH7130 automatically restarts in
this time causing a temporary network disconnect. After two minutes, log in again and check your
new firmware version in the Status screen.
10.7 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the WAH7130's current configuration to a file on
your computer. Once your WAH7130 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WAH7130.
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
WAH7130 User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Click this to check for the latest updated firmware.
Chapter 10 Maintenance
73
Advertisement
Table of Contents
