Navigating The Smt Interface; Table 2-2. Main Menu Commands - ZyXEL Communications Prestige 100MH User Manual

Prestige 100MH PSTN Router/Hub
2.6

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your
Prestige.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in Table 2-2.
Table 2-2. Main Menu Commands
Operation
Move forward to
another menu
Move backward
to a previous
menu
Move the cursor
Enter information
Required fields
N/A fields
Save your
configuration
Exit the SMT
Chapter 2 Hardware Installation & Initial Setup
2-8
Press/<read> Description
[Enter] To move forward to a sub-menu, type in the number of the
desired sub-menu and press [Enter].
[Esc] Press the [Esc] key to move back to the previous menu.
[Enter] or Within a menu, press [Enter] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous
[Up]/[Down]
and the next field, respectively.
arrow keys
Fill in, or There are two types of fields that you will need to fill in. The first
requires you to type in the appropriate information. The second
Press the
gives you choices to choose from. In the second case, press the
[Space bar] to
[Space bar] to cycle through the available choices.
toggle
<?> All fields with the symbol <?> must be filled in order be able to
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is not available.
[Enter] Save your configuration by pressing [Enter] at the
message:[Press ENTER to confirm or ESC to cancel]. Saving
the data on the screen will take you, in most cases to the
previous menu.
Type 99, then Type 99 at the Main Menu prompt and press [Enter] to exit the
SMT interface.
press [Enter].