Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Icon
The icon(s) shown in bold turns off when:
application-specific initialization.
123
SIP application startup. Icon 3 is extinguished if a generic SIP configuration file is found.
12
Icon 2 is extinguished if a handset specific SIP configuration file is found.
(no icons)
Handset is attempting to register each of the specified line contacts.
Registering
(no icons)
Handset has registered with at least one contact on one proxy server. Initialization is
EXT.
complete. The handset is in standby mode ready to receive and place calls. The line one
XXXXX
contact is displayed.
Handset Modes
88
During the last three steps of this process, the handset contacts the
provisioning server and downloads general SIP information about the
proxy server(s), downloads specific information pertaining to the
handset, registers with the SIP server, and verifies handset
credentials. Once this process is complete, the handset is ready to use.
If the username and password have not been defined in the Admin
menu or previously via the Remote Configuration file, you will be
prompted to enter both of these items before the extension number
can display. The user name must correspond to the configuration file
that contains user-specific information. If the file is not found, an error
message will appear and the handset will restart.
Standby mode (on-hook)
In standby mode, the handset is waiting for an incoming call or for
the user to place an outgoing call. The extension number is shown on
the display and there is no dial tone. In this mode, the handset is
conserving battery power and wireless LAN bandwidth.
When an incoming call arrives, the handset rings; the handset enters
the active mode and remains in this mode until the call is ended. The
call is answered by pressing the
The handset will ring according to user preference as specified in the
standby menus. The ringing can be silenced by pressing the
If you do not wish to accept the call, some SIP call servers support the
key or the
START
Answ
PN: 1725-36038-001_N.docx
or
softkey.
Spkr
key.
END
Advertisement
Table of Contents
