Version 1 Vs. Version 2 Parameter Names - Polycom SpectraLink 1725-36038-001 Administration Manual

Polycom wireless telephone administration guide
Table of Contents

Advertisement

Version 1 vs. Version 2 Parameter Names

Parameter name in version 1 mode
None
None
CODECS
PROXYn_TYPE (n=1-3)
1
PROXYn_ADDR
(n=1-3)
1
PROXYn_ADDR
(n=1-3)
PROXYn_KEYPRESS_2833 (n=1-3)
PROXYn_ KEYPRESS_INFO (n=1-3)
PROXYn_HOLD_IP0 (n=1-3)
PROXYn_PRACK (n=1-3)
PROXYn_REREG_SECS (n=1-3)
PROXYn_KEEPALIVE_SECS (n=1-3)
PROXYn_DOMAIN (n=1-3)
PROXYn_ CALLID_PER_LINE (n=1-3)
PROXYn_ MAIL_ACCESS (n=1-3)
PROXYn_ MAIL_SUBSCR (n=1-3)
PROXY1_ FAILOVERIP
PROXY1_ FAILOVERIP
PROXYn_ CONF_IP_ADDRESS
PROXYn_ CONF_IP_ADDRESS
4
FAVORITE
SIP_LINEn (n=1-5)
SIP_LINE_CALLIDn (n=1-5)
PN: 1725-36038-001_N.docx
Many new parameters that exist in Version 2 Configuration mode do
not exist in Version 1 Configuration mode. Some of the SIP
parameters were carried over to Version 2 from Version 1. However,
the SIP parameter names in version 2 mode are not the same as in
version 1 mode. The following table describes the differences in
parameter names between the two modes. If a parameter is not listed
in the table, then it did not exist in Version 1 Configuration mode.
2
2
3
(n=1-3)
3
(n=1-3)
Appendix B: Remote Configuration Parameters Definition
Parameter name in version 2 mode
SIP_USERNAME1-6
SIP_PASSWORD1-6
SIP_CODEC_LIST
SIP_PROXYn_TYPE (n=1-3)
SIP_PROXYn_SRVR (n=1-3)
SIP_PROXYn_PORT (n=1-3)
SIP_PROXYn_KEYPRESS_2833 (n=1-3)
SIP_PROXYn_KEYPRESS_INFO (n=1-3)
SIP_PROXYn_HOLD_IP0 (n=1-3)
SIP_PROXYn_PRACK (n=1-3)
SIP_PROXYn_REREG_SECS (n=1-3)
SIP_PROXYn_KEEPALIVE_SECS (n=1-3)
SIP_PROXYn_DOMAIN (n=1-3)
SIP_PROXYn_CALLID_PER_LINE (n=1-3)
SIP_PROXYn_MAIL_ACCESS (n=1-3)
SIP_PROXYn_MAIL_SUBSCR (n=1-3)
SIP_PROXY1_FAILOVER_IP
SIP_PROXY1_ FAILOVER_PORT
SIP_PROXYn_CONF_IP (n=1-3)
SIP_PROXYn_CONF_PORT (n=1-3)
SIP_FAVORITES
SIP_LINEn (n=1-5) ---- same
SIP_LINEn_CALLID (n=1-5)
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectralink 8020Spectralink 8030

Table of Contents