System Configuration - Polycom SpectraLink 1725-36038-001 Administration Manual

System Configuration

PN: 1725-36038-001_N.docx
Each handset may be configured for site-specific requirements by
opening the menu and selecting options or entering specific
Admin
information. Any settings entered in the
system settings. Only the handset being configured is affected by the
menu settings.
Admin
The wireless telephone user may select several usability options from
the Config menu, described below in the
section. This information is also provided in the end-user manual.
The SpectraLink Handset Administration Tool is a software utility
that enables rapid configuration of handsets by utilizing the USB port
on the Dual Charger. See the
document for specific instructions. Please see your service
representative or contact Polycom customer service for more
information about this time-saving tool.
The SpectraLink 8020/8030 Wireless Telephone may be initially
configured with minimum system requirements using the HAT tool.
Thereafter, the Remote Configuration File method can be used to set
the remaining parameters.
Version 1 configuration mode can be used for backward
compatibility if desired. See
Files section below for additional information.
When WPA2 Enterprise security is used, PAC files for EAP-FAST can
be provisioned wirelessly or by using the HAT. For PEAP, certificates
can be enrolled either using HAT or via the Remote Configuration
File.
Other settings that must be configured include, but are not limited to,
WLAN QoS, DSCP tagging, DHCP and regulatory domain
information. If these are not selected by the administrator the handset
will use the default settings. Certain settings do not have default
values and must be configured. SSID and related security settings and
Regulatory Domain parameters are mandatory, have no default value
and need to be specified.
menu must conform to
Admin
User-Defined Preferences
Handset Administration Tool (HAT)
Version 1 and Version 2 Configuration
3
27