Polycom SpectraLink 1725-36038-001 Administration Manual page 60

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
1 level 2
st
Diagnostics Run Site Survey
Enable Diagnostics
*Disable Diagnostics
Syslog Mode
Halt on Error
*Restart on Error
Restore Defaults
Demos Graphics Demo
* default setting
† Only those 802.11a bands that are available in the selected domain will be listed. See Appendix A for
complete information.
‡ Subbands have not been established for the b and b/g mixed or the g-only mode at this writing.
Provision is made in the software to accommodate these ranges once established. Until added, selecting
either of these two modes will immediately bring up Transmit Power options.
60
level 3
nd rd
*Disabled
Errors
Events
Full
Modifications of settings under
reflected in the corresponding settings under
Custom
" " or vice versa. If the configuration is changed from "
Custom
" " or vice versa, it is recommended to double-check all
settings.
level 4 level
th

WLAN Settings
5 level
th
[Transmit Power]
5mW (7dBm)
10mW (10dBm)
20mW (13dBm)
*30mW (15dBm)
40mW (16dBm)
50mW (17dBm)
100mW (20dBm)
CCX
= " " may get
WLAN Settings
=
CCX
" to
PN: 1725-36038-001_N.docx