Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
68
SSID
Enter the SSID.
WLAN Settings
Select between Custom and CCX modes. The Custom mode allows
explicit control of all of the security and QoS settings. Using CCX
mode automatically enables the CCXv4 features and functions, with
only the 802.1X mechanism needing to be selected.
Custom – Security
Handset security setting should match exactly the settings in your
APs. Consult the
VIEW Configuration Guide
your facility for information on which of the security methods are
certified.
Encryption keys, Username and Password display as they are
entered. For security reasons, these items will not display when a
user returns to the Administration menu.
disables any 802.11 encryption or security authentication
*NONE
mechanisms.
(Wired Equivalent Privacy) is a wireless encryption protocol that
WEP
encrypts data frames on the wireless medium allowing for greater
security in the wireless network. If WEP is required at this site, you
must configure each handset to correspond with the encryption
protocol set up in the APs. Select the entries from the options below to
enable the handset to acquire the system.
Authentication
Select either
Open System
WEP Enable/Disable
Select either
Enable WEP
Key Information
Enter the key number specified for use by the
Default Key
handsets. This will be
Select either
Key Length
length specified for use at this location.
Scroll to the key option that corresponds to the
Key 1-4
that was entered above. Enter the encryption key as a
Key
sequence of hexadecimal characters. (Use the
access hexadecimal digits A through F.
for the APs installed in
or
.
Shared Key
or
.
Disable WEP
through
.
1
4
or
depending on the key
40-bit
128-bit
PN: 1725-36038-001_N.docx
Default
and
keys to
2
3
Advertisement
Table of Contents
