Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Message
Description
Service Rej.
The SpectraLink 8000 SVP Server has
rejected a request from the handset.
Storing Config
Handset is storing changes to handset
configuration.
SVP Service Rej.
The SpectraLink 8000 SVP Server has
rejected a request from the handset.
System Busy
y...y = SVP Server IP Address.
yyy.yyy.yyy.yyy
SVP Server has reached call capacity.
System Locked
SpectraLink 8000 SVP Server is
(with Busy Tone)
locked.
TFTP
A failure has occurred during a
ERROR(x):yy
provisioning software download. (x) =
The file number which was being
downloaded; yy is an error code
describing the particular failure.
Possible error codes are:
01 = provisioning server did not find
the requested file.
02 = Access violation (reported from
provisioning server).
07 = provisioning server reported "No
such user" error.
16 = No provisioning server address.
81 = File put into memory did not CRC.
FF = Timeout error. provisioning server
did not respond within a specified
period of time.
Too Many Errors
The handset continues to reset and
cannot be recovered.
Unknown
A phrase is missing from the phintl file.
xx:yy:zz
Updating ...
The handset is internally updating its
software images.
130
Action
The handset will restart and attempt to
re-register with the SpectraLink 8000
SVP Server, which should fix the
problem. Report to your administrator if
it keeps happening.
None. Informational only. The handset
may display this briefly following a
configuration change or software
download.
The handset will restart and attempt to
re-register with the SVP Server, which
should fix the problem. Report to your
administrator if it keeps happening.
All call paths are in use, try the call
again in a few minutes.
Try call again later, system has been
locked for maintenance.
Error code 01, 02, 07, or 16 - check the
provisioning server configuration.
Error code 81, the handset will attempt
to download the file again.
For other messages, power off the
handset, then turn it on again to retry
the download. If the error repeats, note
it and contact Polycom Customer
Support.
Fatal error. Return handset to Polycom.
Download new software from the
Polycom website per
Chapter10:
Software
Maintenance.
None. The handset may do this briefly
after a download. This is informational
only.
PN: 1725-36038-001_N.docx
Advertisement
Table of Contents
