Polycom SpectraLink 1725-36038-001 Administration Manual page 67

Polycom wireless telephone administration guide
Table of Contents

Advertisement

PN: 1725-36038-001_N.docx
files. If the HTTP server IP or TFTP server IP is configured (not set to
0.0.0.0 or 255.255.255.255) with either Static IP configuration or using
DHCP option 66 for TFTP, or the boot server/next server (siaddr)
field, the handset will check for newer software each time it is
powered on or comes back into range of your network. This check
takes only seconds and ensures that all handsets in your network are
kept up-to-date with the same version of software.
TFTP Server IP
network, A TFTP server is not required if the files are on an
HTTP server.
HTTP Server IP address
on your network. An HTTP server is not required if the files
are on a TFTP server.
An integer from 0-65535 and will default to 80
HTTP Port
HTTP Server Directory Path
identifies the location of the configuration files.
The IP address of the syslog server. See the
Syslog Server IP
Diagnostic Tools section for more information.
DNS Server IP / DNS Domain
DNS domain is a string from 1-127 characters.
The IP address of the time server.
Time Server IP
The IP address of the SpectraLink 8000 SVP Server. If
SVP Server IP
using Static IP configuration, this is simply the IP address of the
SpectraLink 8000 SVP Server. Note that the SpectraLink 8000 SVP
Server must be statically configured to have a permanent IP
address. If DHCP is being used, the handset will try the following,
in order: the DHCP option 151, then a DNS lookup of
"SLNKSVP2" if the DHCP options 6 (DNS server) and 15 (Domain
Name) are configured.
The SIP TFTP Server IP address no longer exists. Older versions
of Polycom SIP allowed the user to specify different TFTP servers
for downloading code and downloading configuration files. Version
131.031 and above allow specification of only one TFTP server
address. Both functional code and configuration files are
downloaded from the same location.
The IP address of the SpectraLink 8000 OAI
OAI Server IP
Gateway. If using Static IP configuration, this is simply the IP
address of the SpectraLink 8000 OAI Gateway. If DHCP is being
used, the handset will try the DHCP option 152.
Configure Each SpectraLink Wireless Telephone
The IP address of a TFTP server on your
A single IP address for the HTTP server
A string from 1-127 characters that
The IP address of the DNS server. The
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectralink 8020Spectralink 8030

Table of Contents