Version 2: The Handset-Specific Files (E.g. Sip_Xxxx.txt) - Polycom SpectraLink 1725-36038-001 Administration Manual

Version 2: The Handset-Specific Files (e.g. sip_xxxx.txt)

PN: 1725-36038-001_N.docx
The handset-specific configuration file provides specific information
for the handset to identify itself and communicate with other
handsets. Each handset must have its own file with a unique filename.
You may use the same parameters as the generic file when
programming the handset files if you wish to override a common
setting. The **** SIP SETTINGS **** section of the settings.txt file
contains sample parameter information. Use this section to start your
custom user files.
Each handset must have a specific filename with the form of
SIP_xxxx.txt where xxxx is as assigned to each individual user by
the system administrator (e.g. sip_3001.txt or sip_JohnDoe.txt).
Username requirements are: numbers only, no spaces, no
punctuation, case is ignored, 1-16 characters.
The specific file should contain data specific to each user such as
authentication credentials and line appearance data. See Chapter 5
Configure Each SpectraLink 8020/8030 Wireless Telephone, section
The Admin Menu, subsection
Gather information
Gather the following information:
Username(s) and password(s) for this username;
•
Extension numbers for up to 5 lines per user;
•
Caller ID for each of the 5 lines (optional);
•
Other parameters as shown in the sample file;
•
Favorites to be programmed in the generic file. A total of 15
•
Favorites are allowed.
Create username file
Program a file for each username. The following parameters are good
options to include in the username file:
SIP_USERNAME (1-6): the first set is required (SIP_USERNAME1
and SIP_PASSWORD1) unless they are to be entered at handset
startup in the login screen or are already added by HAT or the
Admin menus. Usernames 2-6 are optional and are used to
SIP Registration.
System Configuration
45