Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
72
802.11 config
Once the regulatory domain is set, the
displayed. Only one may be chosen.
default. Press
to set the mode. If the mode has subbands, the
NavOK
list will open. If the mode does not have subbands, the
Subband
r list will open.
Transmit Powe
g only
Use
mode if all of your infrastructure and client devices will
use only 802.11g. The handsets will operate up to 54 Mb/s in this
mode. If any 802.11b capable clients or infrastructure are used in
your wireless LAN then do not use
and b/g mixed
mode for optimum performance.
b & b/g mixed
Use
if some of your infrastructure components only
understand 802.11b. The handsets will operate up to 11 Mb/s.
Subbands have not been established for the
g only
mode at this writing. Provisions are made in the software to
accommodate these ranges once established. Newly added
subbands may not appear in the
Subband
Once a mode is set the subband list will display, if applicable.
Only those ranges which are allowed in the set regulatory domain
and that pertain to the set mode are displayed. Note that for
802.11a the bands labeled
regulatory domain. Multiple subbands may be set. Navigate to the
desired subband and set with
will open. Once the
returned to the subband list.
To deselect a subband, navigate to it and press
Once the subband settings are as desired, press the
exit to the
Network Setup
Transmit power
For subbands: The
pressed from the
required for each subband. Only one level may be set per
subband. Only those power levels which apply to the
regulatory domain and 802.11 mode are listed. Navigate to the
desired level and press
list. Another subband may be selected which repeats the
process.
802.11 Config
802.11(b & b/g mixed)
g only
mode, instead use
Admin
menu table above.
will vary depending on the set
DFS
The
NavOK.
setting is done, you will be
Transmit Power
menu.
list opens when
Transmit Power
menu. A transmit power setting is
Subband
to set and return to the subband
NavOK
modes are
is the
802.11b
b and b/g mixed
or the
menu
Transmit Power
.
NavOK
softkey to
Done
is
NavOK
PN: 1725-36038-001_N.docx
Advertisement
Table of Contents
