Polycom SpectraLink 1725-36038-001 Administration Manual page 122

Polycom wireless telephone administration guide
Table of Contents

Advertisement

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Message
Description
Auth Timeout
x...x = AP MAC address.
xxxxxxxxxxxx
Handset did not receive authentication
response from AP; displays MAC of
failing AP.
Bad Code Type xx
xx, yy = software license types.
Expected Code
Handset software does not match
Type yy
current handset license selection.
Bad Config
Some needed configuration parameter
has not been set.
Bad SSID
The handset has not had an SSID
entered.
Bad Phintl File
Handset software download files are
incorrect or corrupted.
Bad Program File
Handset software download files are
incorrect or corrupted.
(battery icon),
Low battery.
Battery Low,
beep (audio)
Battery Failure
The Battery Pack is not functioning.
Battery Failed
Battery Pack is damaged or
incompatible with handset.
Can't Renew
y...y = DHCP server IP address.
DHCP
DHCP server is not responding to
yyy.yyy.yyy.yyy
initial renewal attempt.
122
Action
Check handset and AP security
settings.
Ensure AP is configured per VIEW
Configuration Guide.
Try another AP.
Download new software from the
Polycom website per
Chapter 10:
Software
Maintenance.
Check all required handset
configuration parameters for valid
settings.
Statically configure an SSID in the
Admin menu.
Download new software from the
Polycom website per
Chapter 10:
Software
Maintenance.
Download new software from the
Polycom website per
Chapter 10:
Software
Maintenance.
In call: the battery icon displays and a
soft beep will be heard when the user is
on the handset and the battery charge
is low. User has 15–30 minutes of
battery life left.
Not in call: The battery icon displays
whenever the battery charge is low The
message Battery Low and a beep
indicate a critically low battery charge
when user is not on the handset. The
handset will not work until the Battery
Pack is charged.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery Pack.
Only SpectraLink Battery Packs will
work.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery Pack.
Only SpectraLink Battery Packs will
work.
Configuration problem. Check the IP
address configuration in the DHCP
server.
PN: 1725-36038-001_N.docx

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectralink 8020Spectralink 8030

Table of Contents