Charge The Handset - Polycom CX400 Quick Start Manual

Charge the Handset

To charge the batteries in the handset:
1. Remove the battery cover, and insert the rechargeable battery into the back of the phone.
2. Replace the battery cover, and place the handset into the cradle.
Startup
To turn on the handset, press and hold Power
On key for at least three seconds until the
display appears. The Handset Status LED will
be solid green. The display will show your
account name and your presence state. The
cradle connection LED will appear solid green
when the handset is turned on and there is radio
link between the cradle and the handset. If the
cradle connection LED appears flashing green
when the handset is in the cradle, the handset
and cradle may not be paired or there may be
other issues.
Polycom CX400 Cordless Phone Quick Start Guide
Rechargeable Battery
To ensure that the Speakerphone mode works
as intended, go to the "Setup Audio and
Video..." wizard under the "Tools" menu in
Microsoft Office Communicator 2007 on your
computer. On the "Speaker/Microphone or
Speakerphone" page, select your computer's
sound card for the speaker and the Polycom
CX400 for the microphone (you may need to
select "Custom" in the top text box first).
Documentation and support are available at
www.polycom.com/support/voice/ .