Snmp - Polycom SpectraLink 1725-36038-001 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Message type
Probe Recovery
DCA unknown MgmtAction
txMissedIrptPatchCnt
SIP Specific Syslog Messages
Number of methods in header exceed maximum
size
SIP <method> request received from <ipaddr>
SIP <method> request sent to <ipaddr>
SIP <code> response received from <ipaddr>
SIP <code> response sent to <ipaddr>
Call established to <ipaddr>
Call terminated to <ipaddr>
Invalid SIP <method> request received from
<ipaddr>, rc <code>
Invalid SIP <code> response received from
<ipaddr>, rc <code>
Invalid value for <parameter> in generic
configuration file
Invalid value for <parameter> in specific
configuration file
Value too long for <parameter> in generic
configuration file
Value too long for <parameter> in specific
configuration file
Download aborted code incompatible. Error=####
DCA unknown MgmtAction category code=###
CHARGER-Battery temp out of range

SNMP

114
SNMP Get commands may be issued to the handset from an SNMP
remote application if SNMP is enabled on the handset. SNMP Set and
Trap commands are not supported except for a Set command for a
single parameter to allow remotely enabling or disabling SNMP. An
SNMP address and public or private community strings must be
configured and SNMP enabled on the handset for SNMP Get
commands to be processed. An SNMP address and private
community string must be configured on the handset for SNMP Set
commands to be processed.
Errors Events
No Yes
Yes Yes
No Yes
Yes Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
PN: 1725-36038-001_N.docx
Full
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes