Sip Integration Factors - Polycom SpectraLink 1725-36038-001 Administration Manual

SIP Integration Factors

PN: 1725-36038-001_N.docx
See Appendix B: Remote Configuration Parameters Definition
more information on the SIP commands mentioned in this chapter.
CODECs
The SpectraLink 8020/8030 Wireless Telephones are compatible with
the G.711µ-law, G.711a-law and G.729 codecs. the codecs can be used
in a preferred order which is set in the configuration files.
DHCP
Dynamic Host Configuration Protocol (DHCP) is a standardized
protocol that enables clients to be dynamically assigned with various
configuration parameters, such as an IP address, subnet mask, default
gateway, and other critical network configuration information. DHCP
servers centrally manage such configuration data, and are configured
by network administrators with settings that are appropriate for a
given network environment. The handset will use the DHCP options
shown in the following table if DHCP use is enabled. The DHCP
setting will always take precedence if it is set and if it is available.
Option SIP Parameter
1 NA
3 NA
6 DNSSRVR
7 LOGSRVR
15 DOMAIN
42 SNTPSRVR
66 TFTPSRVR
151 SVPSRVR
152 OAISRVR
siaddr NA
Some of these values can be statically configured on the phone. If
values are not received via DHCP, the handset will use the statically-
defined values.
Meaning
Subnet mask
Default gateway
DNS server
Syslog server logging
Domain name
NTP Server
TFTP server
SpectraLink 8000 SVP Server
SpectraLink 8000 OAI Gateway
Boot server or next server
2
for
23