Wpa2 Enterprise Peap Certificate Enrollment And Eap-Fast Manual Pac Provisioning - Polycom SpectraLink 1725-36038-001 Administration Manual

WPA2 Enterprise PEAP Certificate Enrollment and EAP-FAST Manual
PAC Provisioning
PN: 1725-36038-001_N.docx
A PEAP certificate or PAC file may be initially provisioned manually
through the Admin menu or through the Handset Administration
Tool (HAT) since they must be present before the handset can acquire
the wireless LAN.
The remote configuration parameters can be set so that the cert can be
upgraded or replaced when it expires. Put the cert on the
provisioning server and specify either the PAC_FILENAME or
SERVER_CERT_FILENAME, where [FILENAME] is the filename of
the certificate or file.
PEAP
The Handset Administration Tool (HAT) is used for enrolling a
handset with a PEAP certificate in DER format. Only the DER
certification format is supported. All other certificate formats need to
be converted into the DER format prior to enrolling the handset.
Choose the tab and use the file browser to identify the
Certificate
certificate to be loaded. Once chosen, HAT will perform a
rudimentary check on the file to make sure the format is DER and that
the certificate date is valid. If these tests pass, HAT will indicate that it
is valid and enable the
onto the handset.
The screen below shows a valid certificate that has been identified
with the file browser.
Configure Each SpectraLink Wireless Telephone
button. Click
Enroll Enroll
to install the certificate
75