Table of Contents
Advertisement
PN: 1725-36038-001_N.docx
1. LINEn: Enter the dial number of the handset. You can enter up
to four additional lines (e.g. LINE2 etc.). E.g.
LINE1 = 3001
2. LINEn_PROXY is the number of the proxy server this line
should register with, as defined in the sip_allusers.cfg file. E. g.
LINE1_PROXY = 1
3. LINEn_SECONDARY_PROXY is the proxy server to be used in
case the primary proxy server fails. This command will only be
implemented when the line has a proxy type of MITEL. E.g.
LINE1_SECONDARY_PROXY = 2
A line can only use a secondary proxy if it and the primary proxy
(defined with LINEn_PROXY) are both of PROXYn_TYPE = MITEL.
If both the primary and secondary proxies are not type MITEL, the
secondary definition will be ignored.
The Mitel Communications Director (MCD) 4.0 or greater is the only
server that supports this redundancy feature.
4. LINEn_CALLID is the data you wish to appear on the caller ID
of the far end of a call. E.g.
LINE1_CALLID = John Doe
For CCME, the value for LINEn_CALLID cannot have commas or
special characters. If a comma or a special character is in this
command, the phone will display an error message "Bad Request
'Mal".
Program specific Favorites
You can define up to 15 total entries including any defined in
sip.allusers.cfg. Enclose a string in quotes if spaces are required. Each
Favorite can be a complete SIP URI. A user name can be blank and
can include escaped characters.
1. Format for Favorites entry
FAVORITE = dial_string: username
Examples of Favorites entries:
FAVORITE = 3001; User Name 1
FAVORITE = 93035551212; User Name 5 Cell
2. See the Favorites section for the allusers file above for
configuration options that prompt users to enter more digits.
3. Save the file with its specific name.
4. Repeat for each handset.
System Configuration
41
Advertisement
Table of Contents
