SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
New filename: pd14shsi.bin was formerly named pd14shim.bin in release packages prior to Polycom SIP software
1
version 131.031.
50
handset and allow it to download remaining parameters from the
settings.txt file.
Manual plus Remote Configuration (Version 2): Manually
•
configure the minimum settings in each handset and then turn on
the handset and allow it to download remaining parameters from
the settings.txt file.
All HAT (Version 2): use the HAT tool to set all parameters in
•
each handset.
All HAT (Version 1): use the HAT tool to set all non-SIP
•
parameters in each handset. In Version 1 Configuration mode, the
configuration files must be used to set the SIP parameters.
Which option you choose depends upon a number of factors
including the number of handsets you need to configure, the
availability of the settings file, and the installation of the HAT utility.
Configuration sequence
1. Download the latest SpectraLink 8020/8030 Wireless
Telephone IP software from
http://support.polycom.com/PolycomService/support/us/su
pport/voice/wi-fi/spectralink_8030_wireless.html.
2. Load the latest version of the SIP code and place it on the
designated provisioning server and ensure the server is started.
The slnk_cfg.cfg is downloaded first by the phone, and defines
the SIP code files that will be subsequently downloaded. Be
sure to use the slnk_cfg.cfg file that comes with the latest
version of the SIP code and do not change the order of the files
within slnk_cfg.cfg.
The following six files are included in the typical SIP software
package.
Description
Configuration file
PHINTL (language translation)
USB downloader
Over-The-Air Downloader (OTADL) pd14odsi.bin
OTADL Shim
1
Functional (telephony protocol)
Filename
slnk_cfg.cfg
pi1400si.bin
pd14udsi.bin
pd14shsi.bin
pd14csi.bin
PN: 1725-36038-001_N.docx