Table of Contents
Advertisement
Appendix B: Remote
Configuration Parameters
Definition
Version 1 Configuration Parameter Definition
Use the following parameters when programming the Version 1 Configuration files. See
the sample configuration files in the next section for more detailed information.
See the table footnotes at the end of the table.
Parameter
CONFIG_MODE
PROXYn_ADDR
PROXYn _DOMAIN
PN: 1725-36038-001_N.docx
Allowable Values
Description
version1
If this statement is
encountered and is set to
version2
Version 2, the phone will
stop processing the
configuration files and
immediately reboot and
begin using version 2
configuration mode.
xxx.xxx.xxx.xxx:pppp
Proxy address. One proxy
address is required but
or
additional proxy addresses
may be used to register
secondary line
appearances.
proxyname:pppp
Domain name
Domain served by this
proxy server.
13
Notes
n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional,
5060 is the default)
proxyname = computer
name (DHCP only)
n = 1, 2, 3
DOMAIN = [example:
spectralink.com]
Can be omitted if a
specific proxy domain
name is not defined at the
proxy server. If omitted,
defaults to the IP address
of the proxy server (see
above).
135
Advertisement
Table of Contents
