Polycom SpectraLink 1725-36038-001 Administration Manual page 137

Polycom wireless telephone administration guide
Table of Contents

Advertisement

Parameter
PROXYn _
MAIL_SUBSCR
PROXYn_
MAIL_ACCESS
PROXYn_
REREG_SECS
PROXYn_FAILOVER
IP_ADDRESS
AUTH
[see warning note
below]
PN: 1725-36038-001_N.docx
Allowable Values
Description
name@xxx.xxx.xxx.x
Contact to whom the
xx
handset should subscribe
for mail notification. See
or
sample .cfg file for more
information.
sip:name@domain
name@xxx.xxx.xxx.x
Contact to whom the
xx
handset should invite to
access the mail center.
This is the main voicemail
or
dial number.
sip:name@domain
35 seconds to
The requested expiration
3600 seconds
interval in REGISTER
request messages.
xxx.xxx.xxx.xxx:pppp
The IP address of the
Interactive Intelligence
failover call server.
or
proxyname:pppp
username;password
Credentials.
In general credentials are
needed for each registered
line.
Appendix B: Remote Configuration Parameters Definition
Notes
n = 1, 2, 3
name = mail server
contact name.
xxx.xxx.xxx.xxx = IP4
address.
Domain where the mail
resides.
This command is only
necessary if the proxy
server does not
automatically create and
renew subscriptions when
the handset registers.
n = 1, 2, 3
name = mail server
contact name.
xxx.xxx.xxx.xxx = IP
address
Domain where the mail
resides.
n = 1, 2, 3
If the server has a lower
maximum setting or a
higher minimum setting
than that requested, the
server response takes
precedence.
See example file
n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional,
5060 is the default)
proxyname = computer
name (DHCP only)
username = The dial
number or string that
identifies the line
appearance. Generally an
extension or phone
number.
password = a secure
password created by the
system administer which
enables a handset to
register and/or function.
137

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectralink 8020Spectralink 8030

Table of Contents