Polycom SpectraLink 1725-36038-001 Administration Manual page 18

Polycom wireless telephone administration guide
Table of Contents

Advertisement

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
18
Wireless Telephones support both HTTP and TFTP download servers
for provisioning the phones. The provisioning server may be on a
different subnet than the APs and/or handsets.
NTP (Network Time Protocol) Server
If WPA2 Enterprise security is used, the handset will confirm the
PEAP certificate has a valid date and time with the NTP Server on the
network, if one is available. If an NTP Server is not available, the
certificate will be assumed valid and operate accordingly.
Authentication Server (if using WPA2 Enterprise)
A RADIUS authentication server must be used to provide
username/password-based authentication using RSA certificates for
PEAPv0/MSCHAPv2 or PAC files for EAP-FAST.
The following authentication servers have been validated for use with
R3.0:
Juniper Networks Steel-belted Radius Enterprise Edition
(formerly Funk), v6.1
Microsoft Internet Security and Acceleration (ISA) Server 2003,
Windows 2008 NPS
Cisco Secure Access Control Server (ACS), v5.2, 4.1
FreeRADIUS v2.1.10, 2.0.1 and 1.1.7
Other RADIUS servers may work properly with SpectraLink
handsets, but have not been tested. Inquiries on untested servers will
receive limited, "Best Effort", support.
PN: 1725-36038-001_N.docx

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectralink 8020Spectralink 8030

Table of Contents