Table of Contents
Advertisement
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
64
The username should correspond to the primary (line 1) dial number
assigned to the user. The username and password should also
correspond to the authentication credentials as created by your
system administrator for your primary line registration. Usernames or
passwords can be erased by selecting the item, then pressing the
softkey and then the
Save
through
allow you to specify additional authentication
Reg 2
Reg 6
usernames and passwords that may be required by your handset for
any additional line appearances (registrations) that may appear in the
specific user's configuration file. This information will be ignored if a
username is not provided.
Login
OAI Enable/Disable
Polycom's Open Application Interface (OAI) enables third-party
computer applications to display alphanumeric messages on the
handset display and take input from the handset keypad. Refer to the
OAI Specification (Version 2.0) documentation for information about
administering the OAI Gateway and the services it can provide.
If you have an OAI Gateway installed in your system, OAI may be
optionally enabled in each handset. You may select whether the
handset should attempt to connect to the SpectraLink 8000 OAI
Gateway by choosing either the
If OAI is enabled, and an IP address (called the
available to the handset (either via DHCP or Static IP configuration),
the handset will communicate with the OAI Gateway at power-on,
and periodically while it is powered-on. If you don't have a
SpectraLink 8000 OAI Gateway installed at your site, you should
disable the OAI feature to preserve network bandwidth and battery
life.
Location Service
Location service may be used to enable or disable the Ekahau Real-
Time Location System (RTLS), select a transmit interval, or enter a
static IP address for the Ekahau Positioning Engine (EPE). Location
services capability is provided by the EPE 4.0 using Ekahau Location
Protocol (ELP). See Ekahau's user documentation for more
information.
The RTLS is disabled by default. Press
RTLS [Enable/Disable]
toggle to the alternate setting. When RTLS is enabled, the handset will
display the RTLS icon
softkey.
or
Enable
Disable
in the top center of the screen.
PN: 1725-36038-001_N.docx
Bksp
options in this menu.
) is
OAI Server IP
to
NavOK
Advertisement
Table of Contents
