Leg Supports; Calf Belt; Removing The Calf Belt; Attaching The Calf Belt - Meyra Eurochair2 2.750 Operating Manual

Lightweight wheelchairs
Table of Contents

Advertisement

LEG SUPPORTS

Before any actions on the leg supports
the wheelchair is to be secured against
unintentional rolling motions.
☞ Therefore observe chapter Brake on
page 12.

Calf belt

Do not drive without the calf belt. – Dan-
ger of accidents.
The removable calf belt (1) prevents the feet
from sliding off the back of the footboard.
☞ The calf belt must be removed in order
to swivel away the leg supports.
☞ The calf belt is omitted for height ad-
justable leg supports and is replaced by
a calf pad.

Removing the calf belt

For removal the calf belt is to be pulled from
the attachment pins (2).

Attaching the calf belt

For attachment both loops of the calf belt
are slid over the attachment pins (2).

Length adjustment of the calf belt

For length adjustment, the calf belt is guid-
ed around the special attachment pins (2)
and adjusted in length with a velcro fasten-
er.
1
2
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eurochair 1.850Eurochair 1.750Eurochair2 pro 2.850Eurochair2 xxl 2.850

Table of Contents