Leg Supports; Calf Belt; Removing The Calf Belt; Attaching The Calf Belt - Meyra 9.500 Operating Manual

Electric wheelchair
Table of Contents

Advertisement

LEG SUPPORTS

Attention:
!
Before any actions on the leg sup-
ports the wheelchair is to be se-
cured against unintentional rolling
motions.
Therefore observe chapter Se-
curing the electric wheelchair
on page 10.

Calf belt

The removable calf belt (1) prevents
the feet from sliding off the back of
the footplates.
Attention:
!
Do not drive without the calf belt.
– Danger of accident!
Note:
The calf belt must be removed in
order to swivel away the leg sup-
ports.
The calf belt is omitted for height
adjustable leg supports and is re-
placed by a calf pad.

Removing the calf belt

For removal the calf belt is to be
pulled from the attachment pins (3).

Attaching the calf belt

For attachment both loops of the calf
belt are slid over the attachment pins
[2].

Length adjustment of the calf belt

For length adjustment, the calf belt is
guided around the special attachment
pins (3) and adjusted in length with a
velcro fastener.
2
1
3
21

Advertisement

Table of Contents
loading

Table of Contents