Agilent Technologies 8960 Series Reference Manual page 733

Error Message
-113 Undefined header
-114 Header suffix out of range
-120 Numeric data error
-121 Invalid character in number
-123 Exponent too large
-124 Too many digits
-128 Numeric data not allowed
-130 Suffix error
-131 Invalid suffix
-134 Suffix too long
-138 Suffix not allowed
-140 Character data error
-141 Invalid character data
-144 Character data too long
Description
Indicates the header is syntactically correct, but it is
undefined for this specific device. For example, *XYZ is
not defined for any device.
Indicates the value of a header suffix attached to a
program mnemonic makes the header invalid.
This error, as well as errors -121 through -129, are
generated when parsing a data element which appears
to be numeric, including non-decimal numeric types.
This particular error is used if the device cannot detect
a more specific error.
Indicates an invalid character for the data type being
parsed was encountered. For example, an alpha in a
decimal numeric or a "9" in octal data.
Indicates the magnitude of an exponent was greater
than 32000, see IEEE 488.2, 7.7.2.4.1.
Indicates the mantissa of a decimal numeric data
element contained more than 255 digits excluding
leading zeros, see IEEE 488.2, 7.7.2.4.1.
Indicates that a legal numeric data element was
received, but the device does not accept one in this
position for the header.
This error, as well as errors -131 through -139, are
generated when parsing a suffix. This particular error
message is used if the device cannot detect a more
specific error.
Indicates the suffix does not follow the syntax
described in IEEE 488.2, 7.7.3.2, or the suffix is
inappropriate for this device.
Indicates the suffix contain more than 12 characters,
see IEEE 488.2, 7.7.3.4.
Indicates that a suffix was encountered after a
numeric element that does not allow suffixes.
This error, as well as errors -141 through -149, are
generated when parsing a character data element.
This particular error message is used if the device
cannot detect a more specific error.
Indicates that the character data element contains an
invalid character or the particular element received is
not valid for the header.
Indicates the character data element contains more
than twelve characters, see IEEE 488.2, 7.7.1.4.
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_neg100.fm
-100 through -199 Error Message Descriptions
733