Agilent Technologies 8960 Series Reference Manual page 729

-200 through -299 Error Message Descriptions
Description
These errors are generated when something occurs that is incorrect in the current state of the instrument.
These errors may be generated by a user action from either the remote or the manual user interface.
Error Message
-200 Execution error
-203 Command protected
-220 Parameter error
-221 Setting conflict
-222 Data out of range
-223 Too much data
-224 Illegal parameter value
-225 Out of memory
-226 Lists not the same length
-230 Data corrupt or stale
-231 Data questionable
Description
This event bit (Bit 4) indicates a PROGRAM DATA
element following a header was outside the legal input
range or otherwise inconsistent with the device's
capabilities, see IEEE 488.2, 11.5.1.1.5.
Indicates that a legal password-protected program
command or query could not be executed because the
command was disabled.
Indicates that a program data element related error
occurred.
Indicates that a legal program data element was
parsed but could not be executed due to the current
device state.
Indicates that a legal program data element was
parsed but could not be executed because the
interpreted value was outside the legal range defined
by the devices
Indicates that a legal program data element of block,
expression, or string type was received that contained
more data than the device could handle due to memory
or related device-specific requirements.
Indicates that the value selected was not part of the
list of values given.
The device has insufficient memory to perform the
requested operation.
Attempted to use LIST structure having individual
LIST's of unequal lengths.
Indicates invalid data, a new reading started but not
completed since the last access.
Indicates that measurement accuracy is suspect.
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_neg200.fm
-200 through -299 Error Message Descriptions
729