Step 7: End Connection
The following information provides additional details on Step 7 of the Programming Flowchart. This
information is applicable to all test applications.
Description
In this step you release the call (in active cell mode) or end the mobile station transmission (in test mode).
Contents
•
"Release the Call in Active Cell Mode"
•
"End the Mobile Station Test Mode Transmission"
•
"Partially Preset the Test Set"
Release the Call in Active Cell Mode
In active cell mode, you can release the call with the mobile station in one of two ways:
• Release from the Base Station
• Release from the Mobile Station
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_generic_step7_ac.fm
Step 7: End Connection
143