Display Subsystem; Description; Syntax Diagram And Command Descriptions - Agilent Technologies 8960 Series Reference Manual

DISPlay Subsystem

DISPlay Subsystem

Description

The DISPlay subsystem is used to configure the test set's display mode or display brightness . Use of the
DISPlay subsystem is not required to set or query any data or results.
Display Backlight Dimming
The test set's display brightness parameter has two settings at this time, high and medium. The life of the
display's backlight will be maximized when brightness is set to medium. The test set has an auto dimming
feature that will lower the display brightness automatically if approximately 10 minutes pass without a key
being pressed on the test set's front panel. The display will return to the brightness level shown in the Display
Brightness field when the test set is set to local and any front panel key is pressed. There is no other user
control for this feature.

Syntax Diagram and Command Descriptions

"DISPlay"
410
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_display_description.fm