Agilent Technologies 8960 Series Reference Manual page 594

STATus:OPERation:
Bit Binary
Number Weighting
0 1
Program Examples - STATus:OPERation:NMRReady:DIGital2000
OUTPUT 714;"STATUS:OPERATION:NMRREADY:DIGITAL2000:EVENT?" !Queries the New Measurement
OUTPUT 714;"STATUS:OPERATION:NMRREADY:DIGITAL2000:CONDITION?" !Queries the New
OUTPUT 714;"STATUS:OPERATION:NMRREADY:DIGITAL2000:ENABLE 8" !Sets New Measurement Results
OUTPUT 714;"STATUS:OPERATION:NMRREADY:DIGITAL2000:NTR 2" !Sets the New Measurement Results
OUTPUT 714;"STATUS:OPERATION:NMRREADY:DIGITAL2000:PTR 4" !Sets the New Measurement
594
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_operation.fm
Condition
Extension Bit This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset
and while a measurement is in Measuring
States. See
page 218.
!Results Ready DIG2000 Event Register.
!Measurement Results Ready DIG2000
!Condition Register.
!Ready DIG2000 Enable Register
!for bit 3.
!Ready DIG2000 Negative Transition
!Register for bit 1.
!Results Ready DIG2000 Positive
!Transition Register
!for bit 2
Description
"Triggering of Measurements" on